Twitter feed

Birel ART
Birel ART France w/ Craig Tanic is the 2017 French Champion in Cadet Craig, from Martinique, won against 97 drivers…
Birel ART
Birel ART on the European podium in KZ - #CIKFIA #EuroChamps
Birel ART
Weather conditions influenced the final results – A top 4 finish in KZ and KZ2 - #CIKFIA
Birel ART
Sunday Heats: Marijn Kremers won again in KZ - #CIKFIA #EuroChamps
Birel ART
Heats results – 18h30: 1-2 in KZ2 with Longhi and Dahlberg, Collet third in OK
Birel ART
Heats results – 15h20: Kremers won in KZ, Longhi in KZ2 #CIKFIA #EuroChamps
Birel ART
Heats results – 13h: a double top 2 finish in KZ2 #CIKFIA #EuroChamps
Birel ART
Will you be near Milan on Aug. 5-6? You can’t miss the experience to race with our N35 near “The Tree of Life” -Exp…
Birel ART
Birel ART with Marijn Kremers on pole position in Kristianstad -


Nevertheless a successful race season and the enthusiastic feedback received from all our dealers and drivers, BIREL ART has worked even harder to further improve our karts and related components aiming at increasing drivability and performances without changing the technical characteristics and baseline of the 2016 models.

The initial that characterizes the new models for 2017 will be S8-B.

RY29-S8-B  Homologation 33/CH/20

It confirmed its simplicity and versatility in particular for the Junior category; the RY29 has undergone some structural & look updating to improve the performance and utilize.

RY30-S8-B Homologation 32/CH/20

The kart RY30-S8, was been confirmed during the 2016 season in all the world and in all the categories; it is very versatile and very performant; it has been updated for the most in the look and small improvements in the accessories but not in the structural as the good feedback of our drivers and result obtained.

RY32-S8-8 Homologation 24/CH/17

The RY32-S8-B has been updated in geometry and the materials to be more versatile and more suitable for a great use into the different categories that use medium-hard tires.


Brake system: the brake system has been updated with different brake pad material and the adoption of cast iron brake disc D.180 to improve braking and wear.

Spindles: the spindle maintains the classic “2 piece” with the introduction of a new spindle stem made from a thicker higher grade material. The characteristic of this accessory will be to give more insertion increasing the grip on the front of the chassis. The new spindle is designated “H.”

Clutch lever: the new vertically adjustable clutch lever works on rollers allowing more precise shifting, while the driver can adjust the position to suit. 

Rear Axle: we have introduced the new “R” rear axle which offers a very good lateral grip,  good stability under braking and optimal traction while leaving the kart very “free”. Another novelties about the rear axle is that they will be specifically produced for:

KZ category with only 4 keys (for inner crown) and a reinforce inside where the crown is fixed. The size is 50x2x1040
KF category also with 4 keys (for external crown) in size 50x2x1020

Stickers: all the “Racing” karts will have new graphics Birel ART ‘EVO’, revised and improved for a look modern, elegant but especially captivating.

Magnesium:  magnesium hubs fully machined: d.50x115 mm double screw besides the ones d.40x100 mm.

Also for 2017 there will be the possibility to order the karts in “FACTORY” version i.e. with hubs both front and rear in magnesium.

Download files: