Twitter feed

Birel ART
🔴 Douglas Lundberg is preparing to participate in the 2021 season with red colors! https://t.co/OzQ8OQU2gS
Birel ART
Perfect fit with 3D printing https://t.co/4HEUKhmkte
Birel ART
Sometimes analog tools come handy! https://t.co/XBhhrGilYd
11/11/2014

New Ricciardo Kart Line 2015

The “Ricciardo Kart” chassis derive from Birel Art Line and will have benefit immediately of the improvements introduced in the new latest generation kart versions 2015 that will combine the experience and the know-how of both companies with the goal of creating an innovative product and more performant.
 
With regard to this, we inform that have been made development in the geometry, and in particular has been changed and improved the construction materials of frames and some accessories with resulting in better performance, easier driving and the constancy of the kart.
 
Fundamental characteristic is that the frame for the shifter categories will have specific geometries and accessories different for the direct drives ones, both developed appositely and specific in order to optimize the characteristic of the power and weight and types of tires.
 
DR01-KF (30mm) // Homologation 31/CH/20
Thanks to the new material utilized, the kart DR01-KF have as characteristic an excellent easier driving, very simple to find the right set up, conjugated a performance of excellent level.
It’s very versatile, easily adaptable to different types of tires and conditions of tracks without working a lot on the basis set up.
 
DR01-KZ (30mm) // Homologation 31/CH/20
Developed specifically for the shifter category the main characteristic of DR01-KZ is the good balance and a good grip on the back, while remaining very sliding and performant. The new  materials used give an additional advantage in the versatility both performance. The novelty of bearing support axle bearing allows to lower the frame of 8mm more compared to the KF version, increasing the efficacy of braking and traction.
 
DR-AR28Y
Frame specifically developed for mini class to which is required a kart with a minimum wheel base of 1010mm. Already tested and used in races with excellent results, it has been conceived to have an extreme adaptability to different types of engines, tires and tracks conditions which can be found in different countries.
 
DR-C28-S // Homologation CSAI02/CH/14
The frame for the Mini categories DR-C28S, has undergone several structural modifies, both in geometry and materials to improve its performance and ease of driving. The new “C” of the spindle  will be a characteristic of it with the eccentric bushings for adjusting the camber and caster as the greater models to improve and ease the setting (cod 10.11676.00 graduated washer  23/0 -10.11677.00 graduated washer  23/0,5 -10.11678.00 graduated washer  23/1,5)
 
 
Completes the new Ricciardo Kart line, also the models:
 
- DR-B25X  -  Baby kart complete with Comer engine C50
- DR C28 – 900 – Mini kart with 900mm wheel base
- DR30C-Y – Promotional kart not homologated Cik/Fia for Entry Level category
- DR01-RX – Kart specific for Rotax DD2 category
 
Rear Brake system FL01 // Homologation 75/FR/20: a new rear brake system has been developed with a monobloc rear caliper of smaller dimension(2 pistons & 2 pads) that is able to provide a very  effective braking while keeping low and constant temperatures, leaving a progressive braking, gradual and very manageable.
 
Spindles: The new spindle provides the possibility of having two (2) positions of steering angle to obtain at  maximum the performance and find the best setting for the different track conditions that may occur. The spindle will be obtained in a single piece using different material than the last year’s version.
 
Stickers: Studied personally by Daniel Ricciardo, the look of the new DR karts will be very particular and  distinguished.
 
Sportswear: a new specific sportswear line Ricciardo Kart will be introduced and available as soon as possible. It will have an innovative and original look,  together with race suit, shoes and gloves coordinate.